arXiv:2603.08278v1 Announce Type: cross Abstract: Accurate and interpretable mortality risk prediction in intensive care units (ICUs) remains a critical challenge due to the irregular temporal structure of electronic health records (EHRs), the complexity of longitudinal disease trajectories, and the lack of clinically grounded explanations in many data-driven models. To address these challenges, we propose \textit{TA-RNN-Medical-Hybrid}, a time-aware and knowledge-enriched deep learning framework that jointly models longitudinal clinical sequences and irregular temporal dynamics through explicit continuous-time encoding, along with standardized medical concept representations. The proposed framework extends time-aware recurrent modeling by integrating explicit continuous-time embeddings that operate independently of visit indexing, SNOMED-based disease representations, and a hierarchical dual-level attention mechanism that captures both visit-level temporal importance and feature/concept-level clinical relevance. This design enables accurate mortality risk estimation while providing transparent and clinically meaningful explanations aligned with established medical knowledge. We evaluate the proposed approach on the MIMIC-III critical care dataset and compare it against strong time-aware and sequential baselines. Experimental results demonstrate that TA-RNN-Medical-Hybrid consistently improves predictive performance in terms of AUC, accuracy, and recall-oriented F$_2$-score. Moreover, qualitative analysis shows that the model effectively decomposes mortality risk across time and clinical concepts, yielding interpretable insights into disease severity, chronicity, and temporal progression. Overall, the proposed framework bridges the gap between predictive accuracy and clinical interpretability, offering a scalable and transparent solution for high-stakes ICU decision support systems.

arXiv:2603.08288v1 Announce Type: cross Abstract: Aircraft engine blade maintenance relies on inspection records shared across manufacturers, airlines, maintenance organizations, and regulators. Yet current systems are fragmented, difficult to audit, and vulnerable to tampering. This paper presents BladeChain, a blockchain-based system providing immutable traceability for blade inspections throughout the component life cycle. BladeChain is the first system to integrate multi-stakeholder endorsement, automated inspection scheduling, AI model provenance, and cryptographic evidence binding, delivering auditable maintenance traceability for aerospace deployments. Built on a four-stakeholder Hyperledger Fabric network (OEM, Airline, MRO, Regulator), BladeChain captures every life-cycle event in a tamper-evident ledger. A chaincode-enforced state machine governs blade status transitions and automatically triggers inspections when configurable flight hour, cycle, or calendar thresholds are exceeded, eliminating manual scheduling errors. Inspection artifacts are stored off-chain in IPFS and linked to on-chain records via SHA-256 hashes, with each inspection record capturing the AI model name and version used for defect detection. This enables regulators to audit both what defects were found and how they were found. The detection module is pluggable, allowing organizations to adopt or upgrade inspection models without modifying the ledger or workflows. We built a prototype and evaluated it on workloads of up to 100 blades, demonstrating 100% life cycle completion with consistent throughput of 26 operations per minute. A centralized SQL baseline quantifies the consensus overhead and highlights the security trade-off. Security validation confirms tamper detection within 17~ms through hash verification.

arXiv:2506.11024v4 Announce Type: replace-cross Abstract: As AI becomes more personal, e.g., Agentic AI, there is an increasing need for personalizing models for various use cases. Personalized federated learning (PFL) enables each client to collaboratively leverage other clients' knowledge for better adaptation to the task of interest, without privacy risks. Despite its potential, existing PFL methods remain confined to rather simplified scenarios where data and models are the same across clients. To move towards realistic scenarios, we move beyond these restrictive assumptions by addressing both data and model heterogeneity. We propose a task-relevance-aware model aggregation strategy to reduce parameter interference under heterogeneous data. Moreover, we introduce Co-LoRA, a dimension-invariant module that enables knowledge sharing across heterogeneous architectures. To mimic the real-world task diversity, we propose a multi-modal PFL benchmark spanning 40 distinct tasks with distribution shifts over time. Extensive experiments shows that our proposed method significantly outperforms the state-of-the-art PFL methods under heterogeneous scenarios.

arXiv:2510.05109v5 Announce Type: replace-cross Abstract: Large Multimodal Models (LMMs) are inherently modular, consisting of vision and audio encoders, projectors, and large language models. Yet, they are almost always executed monolithically, which underutilizes the heterogeneous accelerators (NPUs, GPUs, DSPs) in modern SoCs and leads to high end-to-end latency. In this paper, we present NANOMIND, a hardware--software co-design inference framework for Large Multimodal Models (LMMs) that breaks large models into modular ``bricks'' (vision, language, audio, etc.) and maps each to its ideal accelerator. The key insight is that large models can be broken into modular components and scheduled to run on the most appropriate compute units. It performs module-level dynamic offloading across accelerators on unified-memory SoCs. By combining customized hardware design, system-level scheduling, and optimized low-bit computation kernels, we demonstrate our framework with a compact, battery-powered device capable of running LMMs entirely on device. This prototype functions as a self-contained intelligent assistant that requires no network connectivity, while achieving higher throughput and superior power efficiency under strict resource constraints. The design further bypasses CPU bottlenecks and reduces redundant memory usage through token-aware buffer management and module-level coordination. Our system outperforms existing implementations in resource efficiency, cutting energy consumption by 42.3\% and GPU memory usage by 11.2\%. This enables a battery-powered device to run LLaVA-OneVision with a camera for nearly 20.8 hours.

arXiv:2512.22364v2 Announce Type: replace-cross Abstract: While Text-to-SQL systems achieve high accuracy, existing efficiency metrics like the Valid Efficiency Score prioritize execution time, a metric we show is fundamentally decoupled from consumption-based cloud billing. This paper evaluates cloud query execution cost trade-offs between reasoning and non-reasoning Large Language Models by performing 180 Text-to-SQL query executions across six LLMs on Google BigQuery using the 230 GB StackOverflow dataset. Our analysis reveals that reasoning models process 44.5% fewer bytes than non-reasoning counterparts while maintaining equivalent correctness at 96.7% to 100%, and that execution time correlates weakly with query cost at $r=0.16$, indicating that speed optimization does not imply cost efficiency. Non-reasoning models also exhibit extreme cost variance of up to 3.4$\times$, producing outliers exceeding 36 GB per query, over 20$\times$ the best model's 1.8 GB average, due to missing partition filters and inefficient joins. We identify these prevalent inefficiency patterns and provide deployment guidelines to mitigate financial risks in cost-sensitive enterprise environments.

arXiv:2602.09937v2 Announce Type: replace Abstract: Failures in large-scale cloud systems incur substantial financial losses, making automated Root Cause Analysis (RCA) essential for operational stability. Recent efforts leverage Large Language Model (LLM) agents to automate this task, yet existing systems exhibit low detection accuracy even with capable models, and current evaluation frameworks assess only final answer correctness without revealing why the agent's reasoning failed. This paper presents a process level failure analysis of LLM-based RCA agents. We execute the full OpenRCA benchmark across five LLM models, producing 1,675 agent runs, and classify observed failures into 12 pitfall types across intra-agent reasoning, inter-agent communication, and agent-environment interaction. Our analysis reveals that the most prevalent pitfalls, notably hallucinated data interpretation and incomplete exploration, persist across all models regardless of capability tier, indicating that these failures originate from the shared agent architecture rather than from individual model limitations. Controlled mitigation experiments further show that prompt engineering alone cannot resolve the dominant pitfalls, whereas enriching the inter-agent communication protocol reduces communication-related failures by up to 15 percentage points. The pitfall taxonomy and diagnostic methodology developed in this work provide a foundation for designing more reliable autonomous agents for cloud RCA.

arXiv:2603.02597v1 Announce Type: cross Abstract: As large language models move toward million-token context windows, CPU tokenizers become a major slowdown because they process text one step at a time while powerful GPUs sit unused. We built a GPU-based byte-level BPE tokenizer that follows GPT-2's merge rules. It includes a basic BlockBPE-style kernel and a faster, optimized version that uses cuCollections static map, CUB reductions, and a pybind11 interface for Python. On WikiText103 sequences up to 131k tokens, the optimized GPU tokenizer produces the same tokens as a CPU version and, for the longest inputs, is about 1.7x faster than tiktoken and about 7.6x faster than the HuggingFace GPT-2 tokenizer. Nsight profiling shows that 70-80% of CUDA API time goes to memory allocation, so adding memory pooling should give the biggest speed boost next. Tests on generation tasks using WikiText103 prompts show that our GPU tokenizer's outputs stay within about one percentage point of tiktoken and HuggingFace GPT-2 on similarity and overlap metrics, meaning it keeps output quality while making long-context inference more practical.

arXiv:2510.14686v2 Announce Type: replace-cross Abstract: We introduce xLLM, an intelligent and efficient Large Language Model (LLM) inference framework designed for high-performance, large-scale enterprise-grade serving, with deep optimizations for diverse AI accelerators. To address these challenges, xLLM builds a novel decoupled service-engine architecture. At the service layer, xLLM-Service features an intelligent scheduling module that efficiently processes multimodal requests and co-locates online and offline tasks through unified elastic scheduling to maximize cluster utilization. This module also relies on a workload-adaptive dynamic Prefill-Decode (PD) disaggregation policy and a novel Encode-Prefill-Decode (EPD) disaggregation policy designed for multimodal inputs. Furthermore, it incorporates a distributed architecture to provide global KV Cache management and robust fault-tolerant capabilities for high availability. At the engine layer, xLLM-Engine co-optimizes system and algorithm designs to fully saturate computing resources. This is achieved through comprehensive multi-layer execution pipeline optimizations, an adaptive graph mode and an xTensor memory management. xLLM-Engine also further integrates algorithmic enhancements such as optimized speculative decoding and dynamic EPLB, collectively serving to substantially boost throughput and inference efficiency. Extensive evaluations demonstrate that xLLM delivers significantly superior performance and resource efficiency. Under identical TPOT constraints, xLLM achieves throughput up to 1.7x that of MindIE and 2.2x that of vLLM-Ascend with Qwen-series models, while maintaining an average throughput of 1.7x that of MindIE with Deepseek-series models. xLLM framework is publicly available at https://github.com/jd-opensource/xllm and https://github.com/jd-opensource/xllm-service.

arXiv:2512.22420v4 Announce Type: replace-cross Abstract: Speculative decoding (SD) accelerates LLM inference by verifying draft tokens in parallel. However, this method presents a critical trade-off: it improves throughput in low-load, memory-bound systems but degrades performance in high-load, compute-bound environments due to verification overhead. Existing speculative decoding methods use fixed lengths and cannot adapt to workload changes or decide when to stop speculation. The cost of restarting speculative inference also remains unquantified. Under high load, the benefit of speculation diminishes, while retaining the draft model reduces KV-cache capacity, limiting batch size and degrading throughput. To overcome this, we propose Nightjar, a resource-aware adaptive speculative framework. It first adjusts to the request load by dynamically selecting the optimal speculative length for different batch sizes. Crucially, Nightjar proactively disables speculative decoding when the MAB planner determines that speculation is no longer beneficial, and during the disabled phase, offloads the draft model to the CPU only under GPU memory pressure. This reclaims memory for the KV cache, thereby facilitating larger batch sizes and maximizing overall system throughput. Experiments show that Nightjar achieves average 27.29% higher throughput and up to 20.18% lower latency compared to standard speculative decoding under dynamic request arrival rates in real-time LLM serving scenarios.

arXiv:2602.18531v1 Announce Type: cross Abstract: The energy management problem in the context of smart grids is inherently complex due to the interdependencies among diverse system components. Although Reinforcement Learning (RL) has been proposed for solving Optimal Power Flow (OPF) problems, the requirement for iterative interaction with an environment often necessitates computationally expensive simulators, leading to significant sample inefficiency. In this study, these challenges are addressed through the use of Physics-Informed Neural Networks (PINNs), which can replace conventional and costly smart grid simulators. The RL policy learning process is enhanced so that convergence can be achieved in a fraction of the time required by the original environment. The PINN-based surrogate is compared with other benchmark data-driven surrogate models. By incorporating knowledge of the underlying physical laws, the results show that the PINN surrogate is the only approach considered in this context that can obtain a strong RL policy even without access to samples from the true simulator. The results demonstrate that using PINN surrogates can accelerate training by 50% compared to RL training without a surrogate. This approach enables the rapid generation of performance scores similar to those produced by the original simulator.

arXiv:2602.18797v1 Announce Type: cross Abstract: Massive internet of things microservices require integrating renewable energy harvesting into mobile edge computing (MEC) for sustainable eScience infrastructures. Spatiotemporal mismatches between stochastic task arrivals and intermittent green energy along with complex inter-user interference in multi-antenna (MIMO) uplinks complicate real-time resource management. Traditional centralized optimization and off-policy reinforcement learning struggle with scalability and signaling overhead in dense networks. This paper proposes CADDTO-PPO, a carbon-aware decentralized dynamic task offloading framework based on multi-agent proximal policy optimization. The multi-user MIMO-MEC system is modeled as a Decentralized Partially Observable Markov Decision Process (DEC-POMDP) to jointly minimize carbon emissions and buffer latency and energy wastage. A scalable architecture utilizes decentralized execution with parameter sharing (DEPS), which enables autonomous IoT agents to make fine-grained power control and offloading decisions based solely on local observations. Additionally, a carbon-first reward structure adaptively prioritizes green time slots for data transmission to decouple system throughput from grid-dependent carbon footprints. Finally, experimental results demonstrate CADDTO-PPO outperforms deep deterministic policy gradient (DDPG) and lyapunov-based baselines. The framework achieves the lowest carbon intensity and maintains near-zero packet overflow rates under extreme traffic loads. Architectural profiling validates the framework to demonstrate a constant $O(1)$ inference complexity and theoretical lightweight feasibility for future generation sustainable IoT deployments.

arXiv:2602.19319v1 Announce Type: cross Abstract: Managing personal health data is a challenge in today's fragmented and institution-centric healthcare ecosystem. Individuals often lack meaningful control over their medical records, which are scattered across incompatible systems and formats. This vision paper presents Health+, a user-centric, multimodal health data management system that empowers individuals (including those with limited technical expertise) to upload, query, and share their data across modalities (e.g., text, images, reports). Rather than aiming for institutional overhaul, Health+ emphasizes individual agency by providing intuitive interfaces and intelligent recommendations for data access and sharing. At the system level, it tackles the complexity of storing, integrating, and securing heterogeneous health records, ensuring both efficiency and privacy. By unifying multimodal data and prioritizing patients, Health+ lays the foundation for a more connected, interpretable, and user-controlled health information ecosystem.

arXiv:2505.07755v3 Announce Type: replace-cross Abstract: Edge computing has emerged as a pivotal technology, offering significant advantages such as low latency, enhanced data security, and reduced reliance on centralized cloud infrastructure. These benefits are crucial for applications requiring real-time data processing or strict security measures. Despite these advantages, edge devices operating within edge clusters are often underutilized. This inefficiency is mainly due to the absence of a holistic performance profiling mechanism which can help dynamically adjust the desired system configuration for a given workload. Since edge computing environments involve a complex interplay between CPU frequency, power consumption, and application performance, a deeper understanding of these correlations is essential. By uncovering these relationships, it becomes possible to make informed decisions that enhance both computational efficiency and energy savings. To address this gap, this paper evaluates the power consumption and performance characteristics of a single processing node within an edge cluster using a synthetic microbenchmark by varying the workload size and CPU frequency. The results show how an optimal measure can lead to optimized usage of edge resources, given both performance and power consumption.

arXiv:2512.20363v2 Announce Type: replace-cross Abstract: Federated learning (FL) supports privacy-preserving, decentralized machine learning (ML) model training by keeping data on client devices. However, non-independent and identically distributed (non-IID) data across clients biases updates and degrades performance. To alleviate these issues, we propose Clust-PSI-PFL, a clustering-based personalized FL framework that uses the Population Stability Index (PSI) to quantify the level of non-IID data. We compute a weighted PSI metric, $WPSI^L$, which we show to be more informative than common non-IID metrics (Hellinger, Jensen-Shannon, and Earth Mover's distance). Using PSI features, we form distributionally homogeneous groups of clients via K-means++; the number of optimal clusters is chosen by a systematic silhouette-based procedure, typically yielding few clusters with modest overhead. Across six datasets (tabular, image, and text modalities), two partition protocols (Dirichlet with parameter $\alpha$ and Similarity with parameter S), and multiple client sizes, Clust-PSI-PFL delivers up to 18% higher global accuracy than state-of-the-art baselines and markedly improves client fairness by a relative improvement of 37% under severe non-IID data. These results establish PSI-guided clustering as a principled, lightweight mechanism for robust PFL under label skew.

arXiv:2512.22420v3 Announce Type: replace-cross Abstract: Speculative decoding (SD) accelerates LLM inference by verifying draft tokens in parallel. However, this method presents a critical trade-off: it improves throughput in low-load, memory-bound systems but degrades performance in high-load, compute-bound environments due to verification overhead. Existing Speculative Decoding strategies typically rely on static speculative lengths, failing to adapt to fluctuating request loads or identify the optimal moment to halt speculation. The cost of restarting speculative inference also remains unquantified. During traffic surges, the marginal utility of speculation diminishes; yet, the draft model's persistent memory footprint competes for available KV cache. This resource contention limits the maximum batch size, thereby degrading overall system throughput. To overcome this, we propose Nightjar, a resource-aware adaptive speculative framework. It first adjusts to the request load by dynamically selecting the optimal speculative length for different batch sizes. Crucially, upon detecting significant request queuing or KV cache shortages, it disables speculative decoding and offloads the draft model to the CPU. This reclaims memory for the KV cache, thereby facilitating larger batch sizes and maximizing overall system throughput. Experiments show that Nightjar achieves up to 27.29% higher throughput and 12.90% lower latency compared to standard speculative decoding under dynamic request arrival rates in real-time LLM serving scenarios.

arXiv:2602.13486v1 Announce Type: cross Abstract: Federated low-rank adaptation (FedLoRA) has facilitated communication-efficient and privacy-preserving fine-tuning of foundation models for downstream tasks. In practical federated learning scenarios, client heterogeneity in system resources and data distributions motivates heterogeneous LoRA ranks across clients. We identify a previously overlooked phenomenon in heterogeneous FedLoRA, termed rank collapse, where the energy of the global update concentrates on the minimum shared rank, resulting in suboptimal performance and high sensitivity to rank configurations. Through theoretical analysis, we reveal the root cause of rank collapse: a mismatch between rank-agnostic aggregation weights and rank-dependent client contributions, which systematically suppresses higher-rank updates at a geometric rate over rounds. Motivated by this insight, we propose raFLoRA, a rank-partitioned aggregation method that decomposes local updates into rank partitions and then aggregates each partition weighted by its effective client contributions. Extensive experiments across classification and reasoning tasks show that raFLoRA prevents rank collapse, improves model performance, and preserves communication efficiency compared to state-of-the-art FedLoRA baselines.

arXiv:2602.14849v1 Announce Type: cross Abstract: LLM agents increasingly act on external systems, yet tool effects are immediate. Under failures, speculation, or contention, losing branches can leak unintended side effects with no safe rollback. We introduce Atomix, a runtime that provides progress-aware transactional semantics for agent tool calls. Atomix tags each call with an epoch, tracks per-resource frontiers, and commits only when progress predicates indicate safety; bufferable effects can be delayed, while externalized effects are tracked and compensated on abort. Across real workloads with fault injection, transactional retry improves task success, while frontier-gated commit strengthens isolation under speculation and contention.

arXiv:2601.21972v3 Announce Type: replace Abstract: Recent work has explored optimizing LLM collaboration through Multi-Agent Reinforcement Learning (MARL). However, most MARL fine-tuning approaches rely on predefined execution protocols, which often require centralized execution. Decentralized LLM collaboration is more appealing in practice, as agents can run inference in parallel with flexible deployments. Also, current approaches use Monte Carlo methods for fine-tuning, which suffer from high variance and thus require more samples to train effectively. Actor-critic methods are prevalent in MARL for dealing with these issues, so we developed Multi-Agent Actor-Critic (MAAC) methods to optimize decentralized LLM collaboration. In this paper, we analyze when and why these MAAC methods are beneficial. We propose 2 MAAC approaches, \textbf{CoLLM-CC} with a \textbf{C}entralized \textbf{C}ritic and \textbf{CoLLM-DC} with \textbf{D}ecentralized \textbf{C}ritics. Our experiments across writing, coding, and game-playing domains show that Monte Carlo methods and CoLLM-DC can achieve performance comparable to CoLLM-CC in short-horizon and dense-reward settings. However, they both underperform CoLLM-CC on long-horizon or sparse-reward tasks, where Monte Carlo methods require substantially more samples and CoLLM-DC struggles to converge. Our code is available at https://github.com/OpenMLRL/CoMLRL/releases/tag/v1.3.6.

arXiv:2408.10746v2 Announce Type: replace-cross Abstract: Large language models (LLMs) have unlocked a plethora of powerful applications at the network edge, such as intelligent personal assistants. Data privacy and security concerns have prompted a shift towards edge-based fine-tuning of personal LLMs, away from cloud reliance. However, this raises issues of computational intensity and resource scarcity, hindering training efficiency and feasibility. While current studies investigate parameter-efficient fine-tuning (PEFT) techniques to mitigate resource constraints, our analysis indicates that these techniques are not sufficiently resource-efficient for edge devices. To tackle these challenges, we propose Pluto and Charon (PAC), a time and memory efficient collaborative edge AI framework for personal LLMs fine-tuning. PAC breaks the resource wall of personal LLMs fine-tuning with a sophisticated algorithm-system co-design. (1) Algorithmically, PAC implements a personal LLMs fine-tuning technique that is efficient in terms of parameters, time, and memory. It utilizes Parallel Adapters to circumvent the need for a full backward pass through the LLM backbone. Additionally, an activation cache mechanism further streamlining the process by negating the necessity for repeated forward passes across multiple epochs. (2) Systematically, PAC leverages edge devices in close proximity, pooling them as a collective resource for in-situ personal LLMs fine-tuning, utilizing a hybrid data and pipeline parallelism to orchestrate distributed training. The use of the activation cache eliminates the need for forward pass through the LLM backbone,enabling exclusive fine-tuning of the Parallel Adapters using data parallelism. Extensive evaluation based on prototype implementation demonstrates that PAC remarkably outperforms state-of-the-art approaches, achieving up to 8.64x end-to-end speedup and up to 88.16% reduction in memory footprint.

arXiv:2505.07755v2 Announce Type: replace-cross Abstract: Edge computing has emerged as a pivotal technology, offering significant advantages such as low latency, enhanced data security, and reduced reliance on centralized cloud infrastructure. These benefits are crucial for applications requiring real-time data processing or strict security measures. Despite these advantages, edge devices operating within edge clusters are often underutilized. This inefficiency is mainly due to the absence of a holistic performance profiling mechanism which can help dynamically adjust the desired system configuration for a given workload. Since edge computing environments involve a complex interplay between CPU frequency, power consumption, and application performance, a deeper understanding of these correlations is essential. By uncovering these relationships, it becomes possible to make informed decisions that enhance both computational efficiency and energy savings. To address this gap, this paper evaluates the power consumption and performance characteristics of a single processing node within an edge cluster using a synthetic microbenchmark by varying the workload size and CPU frequency. The results show how an optimal measure can lead to optimized usage of edge resources, given both performance and power consumption.